1. Ceramic heater performance and use:
1. One is to wrap the alloy wire in a small ceramic square, and the exterior is covered with a stainless steel shell. Widely used in plastic machinery, chemical fiber machinery.
2. The ceramic heater is a high-efficiency heater with uniform heat distribution. The metal alloy with excellent thermal conductivity ensures the uniform temperature of the hot surface and eliminates the hot and cold spots of the equipment. It has the advantages of long life, good thermal insulation performance, strong mechanical performance, corrosion resistance and magnetic field resistance. Add thermal insulation device to the outer heat dissipation surface, and sinter infrared rays on the inner heat dissipation surface, which can save electricity by 30 percent
3. The ceramic heater is not made by the general mica flexible wire method, but by the ceramic strip threading method, so the power of this product is 0.51.5 times higher than that of the ordinary one. The heating body is made of imported round wire ceramics twisted into a spring shape and penetrated into a ceramic strip. The outer cover is made of stainless steel, and the middle is made of high-temperature heat insulation cotton (aluminum silicate fiberboard) to prevent temperature leakage. The ceramic bar is a high-frequency ceramic with the characteristics of fast heat transfer, hard and unbreakable, high temperature and no deformation and aging.
4. One is to cast alloy wire in a semiconductor with quartz glass as raw material. It has the characteristics of high temperature resistance (up to 1200 degrees), anti-corrosion, beautiful and wear-resistant. Widely used in high temperature heating furnace, semiconductor engineering, glass, ceramics and wire engineering.
5. Ceramic heater is a kind of heater with high temperature and long life. Ceramic heater can adapt to the higher and higher working temperature requirements in modern industry, especially chemical fiber, engineering plastics, plastic machinery, electronics, medicine, food And various pipeline heating, etc.;
6. The ceramic heater is composed of a spiral resistance wire passing through a specially designed high temperature resistant ceramic tile, which is precisely extended and flexible. The beautiful metal shell ceramic fiber constitutes an insulating layer. Forms an effective high temperature, high power density, ribbon heater with a flexible design for easy installation.
2. Technical features: According to the wiring method required by users, the voltage is from 36V, 110V, 180V, 220V, 380V, and the maximum power load is 6.5W per square. Compared with the traditional electric heater, the energy consumption can be reduced by 30 percent .
3. Instructions for ordering:
1. The user should provide product drawings or samples. If there are no drawings or samples, the product specification, model, voltage, power, etc. must be provided.
2. The surface power of the ceramic heater is between 2.5 and 6.5 watts/square centimeter.
4. Precautions for use:
1. The ceramic heater is not waterproof, so it should not be in contact with oil, water and plastic particles during storage and installation to prevent electric leakage.
2. The ceramic heater must be closely attached to the heated body during installation, and the surface of the heated body should be flat and complete without unevenness.
3. If it is found that the surface has a charred black color after use, it indicates that the heat generation and the heat dissipation of the heated body are unbalanced, and it should be adjusted in time to prevent burn through.
4. When using a high-temperature ceramic heater for heating, it should be avoided that the ceramic tile is broken due to strong knocking or collision with hard objects, and the exposed alloy resistance wire will affect the operating life.
5. Before installation, check whether the installation position is consistent with the specifications of the ceramic heater and whether the voltage used is consistent.
V. Instructions for use: 1. The working voltage should not exceed 10 percent of the rated value; 2. The wiring part should be placed outside the heating layer and the insulation layer, and the shell should be effectively grounded;
(This product can be customized according to customer requirements, providing drawings, voltage, power, size)
